ONN universal remotes, exclusively from Walmart, offer a fantastic and affordable way to declutter your home theater by consolidating multiple controllers into one. Programming your ONN remote to control a Vizio TV is a simple process, and this guide provides a complete walkthrough, from quick steps for pros to detailed instructions and troubleshooting for first-time users.
For the Pros: A Quick Programming Reference
- Turn on Vizio TV.
- Hold SETUP until the remote’s indicator light stays on.
- Press the TV button.
- Enter a 4-digit Vizio code from the list below. The light will turn off.
- Test the POWER and VOLUME buttons.
ONN Remote Pre-Programming Checklist
For a smooth setup, quickly confirm these two points before you begin:
- ✅ Battery Power: Start with a new pair of high-quality batteries.
- ✅ Line of Sight: Ensure you have a clear, direct path between the remote and the Vizio TV’s IR sensor.
ONN Remote Code List for Vizio TVs
The vast majority of ONN remotes require a 4-digit code for Vizio TVs. We’ve compiled the most successful codes below. For the highest success rate, please try the “Most Common Codes” first.
| Code Category | Verified Vizio Codes for ONN Remotes |
| Most Common Codes | Start with: 3533, 2472, 2045, 2501, 0081 |
| Full Code List | 2473, 0143, 2476, 2474, 1168, 1169, 0033, 2475, 4039, 4144, 4071 |
How to Program an ONN Remote for Vizio (Two Methods)
If you’re looking for a more detailed walkthrough, here are the step-by-step instructions for the two main programming methods.
Method 1: Manual Code Entry (Recommended)
- Manually power on your Vizio TV.
- Press and hold the SETUP button on the ONN remote until the red indicator light stays on.
- Press and release the TV button. The indicator light will blink once and remain on.
- Enter the first 4-digit code from our “Most Common Codes” list above.
- The indicator light will turn off after a valid code is entered.
- Point the remote at your Vizio TV and test the POWER, VOLUME, and MUTE functions.
Method 2: Automatic Code Search
- Turn on your Vizio TV.
- Press and hold SETUP until the indicator light turns on.
- Press and release the TV button.
- Now, press and release the POWER button. The remote will begin its automatic search.
- Aim the remote at the TV. The moment the TV turns off, immediately press the VOLUME UP button to save the working code.
Troubleshooting Common Programming Issues
- Problem: The indicator light is not turning on or is behaving unexpectedly.
- Solution: This is almost always caused by weak batteries. Try a new set. If that fails, the remote could have a minor electronic fault that the steps in our Vizio remote reset guide can help clear.
- Problem: After programming, some buttons work but others don’t.
- Solution: You have likely found a code with partial compatibility. It’s best to repeat the programming process with the next code on our list or use the auto-search method to find a more suitable match.
ONN Remote for Vizio: FAQ
Yes, the process is the same, but you must press the AUX or AUDIO button instead of the TV button. You’ll need different codes for this, which are available in our complete guide to universal codes for Vizio soundbars.
You can typically find the model number (e.g., ONA13AV269) on a sticker inside the remote’s battery compartment. This is similar for many other retail brands like Blackweb.
Conclusion
With a comprehensive list of codes and two reliable programming methods at your disposal, syncing your ONN universal remote with your Vizio TV is a manageable and rewarding task. This setup streamlines your home entertainment system and puts you in complete control with a single, affordable remote.
Add Comment